Server Technology Sentry PT22, Installation And Operating Manual, Page: 33 / 74

Displaying outlet information
The Show Outlets command displays information about all outlets. This information includes:
•
Sequencing and reboot timer values
•
Descriptive outlet name, if applicable
•
Outlet wakeup state setting
To display outlet information:
At the Sentry: prompt, type show outlets and press Enter .
Example
The following command displays all outlet information:
Sentry: show outlets<Enter>
Outlet Outlet Wakeup Post-On
ID Name State Delay (seconds)
.A1 DataServer_1 Off 90
.B1 WebServer_1 On 0
.C1 FileServer_1 On 0
.D1 On 0
Outlet Options:
Sequence Interval: 2 seconds
Reboot Delay: 15 seconds
Group Administration
Creating a group name
The Create Group command creates a new group name.
To create a group name:
At the Sentry: prompt, type create group , optionally followed by a descriptive name of up to 24
alphanumeric and other typeable characters (ASCII 33 to 126 decimal - spaces are not allowed. Group
names are not case sensitive). Press
Enter .
Example
The following command creates group name ServerGroup_1:
Sentry: create group ServerGroup_1<Enter>
Removing a group name
The Remove Group command removes a group name.
To remove a group name:
At the Sentry: prompt, type remove group , optionally followed by a username. Press Enter .
Example
The following command removes group name ServerGroup_1:
Sentry: remove group ServerGroup_1<Enter>
Adding an outlet to a group
The Add OutletToGroup command adds an outlet to a group. To add more than one outlet, but not all
outlets, you must use multiple Add OutletToGroup commands.
To add an outlet to a group:
At the Sentry: prompt, type add outlettogroup , optionally followed by an outlet name and group name.
Press Enter , or
Type add OutletToGroup , followed by all and the group name. Press Enter .
Examples
The following commands uses absolute outlet names to add outlets A1 and B1 to group name
ServerGroup_1:
Sentry:add OutletToGroup .a1 ServerGroup_1<Enter>
Sentry:add OutletToGroup .b1 ServerGroup_1<Enter>
Sentry PT22 Operations
•
33
Installation and Operations Manual