Examples
The following command changes the password for the user JohnDoe:
Sentry: set user password johndoe<Enter>
Password: <Enter>
Verify Password: <Enter>
Setting user access level privileges
The Set User Access command sets the access level privileges for a user. The Sentry has four defined
access privilege levels; Admin, User, On-Only and View-Only. For more information on user access
levels, see
Changing a user’s access privilege level:
The administrator may also grant administrative privileges to other user accounts allowing the Sentry to
have more than one administrative-level user.
NOTE: You cannot remove administrative privileges from the Admn user unless another user has already been given
administrative access level privileges created.
To set the access level privilege for a user:
At the Sentry: prompt, type
set user access
, followed by
admin
or
user,
optionally followed by a
username and press
Enter
.
Examples
The following command sets the user access level for JohnDoe to Admin:
Sentry: set user access admin johndoe<Enter>
The following command sets the user access level for JaneDoe to User:
Sentry: set user access user janedoe<Enter>
Granting and removing input load viewing privileges
The Set User Envmon command grants or removes input load viewing privileges to/from a general or
view-only user.
NOTE: This command also grants or removes viewing privileges for the status of the optional Equipment Cabinet
Environmental Manager and attached sensors. See the Equipment Cabinet Environmental Manager Installation and
Operations manual for more information.
To grant or remove input load viewing privileges for a user:
At the Sentry: prompt, type
set user envmon
followed by
on
or
off
, optionally followed by a username
and press
Enter
.
Example
The following command grants input load privileges to the user JohnDoe:
Sentry: set user envmon on johndoe<Enter>
Displaying the access privilege levels
The List Users command displays all defined users with their access privilege level.
To display user access privilege levels:
At the Sentry: prompt, type
list users
and press
Enter
.
Example
The following command displays all users with their access privilege level:
Sentry: list users<Enter>
User Privilege Environmental
Name Level Monitoring
JOHNDOE Admin Allowed
JANEDOE User Allowed
JOSEYDOE On-Only Not Allowed
JOEDOE View-Only Not Allowed
Sentry PT22
Operations
•
29
Installation and Operations Manual
Summary of Contents for Sentry PT22
Page 44: ......