LKD-15X User Manual
30
5.2.4 Front View
1. Port LEDs
On Line Connected :Lights ORANGE to indicate that the computer attached to
the corresponding port is up and running. If the LED is flashing, it indicates that
the Port is being used for Cascading to another Master View switch.
Port Selected:Lights GREEN to indicate the currently selected port. The LED is
steady under normal conditions, but flashes when its port is accessed under
Auto Scan
mode.
2. Port Selection Switches
Press a switch to access the computer attached to the corresponding port
Pressing Buttons 1 and 2 simultaneously for 3 seconds performs a Keyboard
and Mouse reset
Pressing Buttons 7 and 8 simultaneously starts Auto Scan Mode.
5.3 Hot Plugging
The LKD-158 supports hot plugging - components can be removed and added back
into the installation by unplugging their cables from the platform ports without the
need to shut the unit down. In order for hot plugging to work properly, these
procedures must be followed:
When hot plugging cables from the platform ports, the cable must be plugged back
into the same port it was removed from.
3
4
5
6
7
8
SELECTED
ONLINE
1
1
2
2