Serpent Cobra GTe 3.1, Instruction Manual

Page: 8 / 48

3.1
bag 2
8
REaR aSSEmbly
STEp 9 STEp 8
M3x8
13x19x4
8x19x6
M5x4
9.1
9.2
After building the differential with new gears
a new differential case and bearings, the
differential may feel a little tight. The connected
parts need at least an hour run-time to create a
perfect match. Attention: When you assemble
the diff with too much initial play, the gears
will not run-in properly and may wear quickly.
After 1 or 2 hours of running the car, re-check
the gear-mesh between the ring gear and the
pinion. All parts should have run-in properly
now. You may ad one or more extra shims on
the pinion or ring-gear, start of by placing 1 x
0.1mm more, and try again.
1
M2.5x5
Wide thread
M3x8
13x19x4
M5x4 M2.5x5
8x19x6