Installation Risk Notification
Warning
Wear protective gloves when handling equipment by hand to prevent cuts from
sharp objects.
Attention
Make sure the cable label is correct before connecting the cable.
Dangerous
Construction operation of high-voltage lines may cause fire or electric shock.
The area through which the AC cable is connected and routed must comply with
local regulations and specifications.
Please carry out construction following relevant construction safety regulations and standards to avoid safety
accidents. The person in charge of this product must undergo strict training, master the correct installation
method of the system and various safety precautions before proceeding with the equipment.
The installation location should avoid the location of low-lying water accumulation and should be kept at a
safe distance from the surrounding fire-explosive facilities and underground pipelines. The installation
location should be away from open flames, high temperature, dust and corrosive environment. The protection
grade of the selected product enclosure should be compared with the installation environment adapt.
The installation position strength must meet the requirements, all fixing bolts should be tightened, Otherwise
there is a risk of falling and dumping. Install the selected cables, terminals and other components to meet the
current requirements. Before and after installation, ensure that all wiring related to the charging equipment is
tight, well insulated, wired correctly, no wear and crush damage, Otherwise there is a risk of fire and electric
shock.
Before powering the device, confirm that the device is well grounded to avoid electric shock. If any part is
damaged during installation, it should be repaired and replaced in time to avoid damage.
Operation and maintenance risk notification
Equipment operation and maintenance must comply with electrical safety operating procedures, Otherwise
there is a risk of fire and electric shock.
The personnel responsible for the operation and maintenance of this product must have the qualifications of
high voltage and alternating current, etc., He must undergo strict training, master the correct operation
method of the system and various safety precautions, and then carry out various equipment operations
otherwise there may be a risk of electric shock.
Dangerous
There is dangerous voltage in the equipment when the system runs, and
non-professionals should not operate and maintain it.
Dangerous
Before maintaining the system clean, electrical connection, and ground
connection, be sure to cut off power . Otherwise, there is a risk of electric
shock and fire.
Summary of Contents for SMT-5K-TL-LV
Page 6: ......