Tips:
Only when the DHCP server of the router is enabled should you select
“Obtain an IP address
automatically”.
You can set the IP address by yourself instead. However, the IP address of the computer and
router should be set within the same subnet and may not share an IP address . The default IP
address is 192.168.16.1 and the subnet m ask is 255.255.255.0, so the IP address should not
be 192.168.16.1.
3.You can find the assigned address under the Support tab, as follows:
4.Click on Start | Programs | Accessories | Command Prompt, type ping 192.168.16.1, and press Enter
(as shown below). If the screen displays the following figure, your PC has connected to the router
successfully.
5.Access the interface of the router by opening a web browser. Input http://192.168.16.1 (the
router’s default IP address) and press Enter.