Sergio Leoni MARLENE P/I Installation Manual Download Page 9

Page: 9 / 80

1-WARNINGS AND WARRANTY CONDITIONS

SPARE PARTS

In the event of a malfunction, consult the retailer who will forward the call to the Technical Assistance Service.

Use only original spare parts. The retailer or service centre can provide all necessary information regarding spare parts.

We do not recommend waiting for the parts to be worn before having them replaced. It is important to perform regular maintenance.

The company declines all liability if the product and any other accessory is used improperly or modified without

authorisation.

All parts must be replaced with original spare parts.

Information for management of waste electrical and electronic equipment containing batteries and

accumulators

This symbol appears on the product, on the batteries, on the accumulators or on their packaging or on their documentation; it indicates

that the product and the batteries or the accumulators included must not be collected, recycled or disposed of with household waste at

the end of their service life.

Improper management of waste electrical and electronic equipment, batteries or accumulators can cause the hazardous substances

contained within to leak out. In order to safeguard the environment and health, the user is required to separate this equipment, and/or

the batteries or accumulators included, from other types of waste and take them to the local collection centre. The distributor can be asked

to collect the waste electrical and electronic equipment under the conditions and according to the procedures laid down by Legislative

Decree 49/2014.

Separate collection and correct treatment of waste electrical and electronic equipment, batteries and accumulators contribute to

conserving natural resources, respect for the environment and ensure the protection of health.

For more information on collection centres for waste electrical and electronic equipment, batteries and accumulators, contact the

competent public Authorities for issue of the authorisations.

Summary of Contents for MARLENE P/I

















































































Search results

Summary of Contents for MARLENE P/I

Reviews:

Related manuals for MARLENE P/I

Brands by name

Popular brands

Sergio Leoni MARLENE P/I, Installation Manual

Search results

Summary of Contents for MARLENE P/I

Reviews:

Related manuals for MARLENE P/I

Brands by name

Popular brands