Sergio Leoni MARLENE P/I Installation Manual Download Page 39

Page: 39 / 80

PRODUCT TYPE VERSION

ITALIANO

ENGLISH

ESPANOL

LANGUAGE

21.25

OGGI È LUNEDÌ E SONO LE

MODIFICA

GIORNO

MODIFICA

ORA

21.25

OGGI È LUNEDÌ E SONO LE

21.25

OGGI È LUNEDÌ E SONO LE

12-FIRST START-UP

START BUTTON

At initial start-up, after connecting the power cable and pressing the I/O button, the stove display will show wording for the software

version and database number (after a few seconds it will move on to the next screen).

If the language has already been set, the next screen will be OFF, otherwise one enters the following parameter.

SELECT LANGUAGE

At initial start-up, if it has never been set, the LANGUAGE choice screen appears.

The system displays all possible languages.

Using the arrow keys (C, D) scroll the languages and confirm the desired language using the “E” (OK) key.

SETTING TIME AND DAY

The keys that are active for this function are: “C”, “D”, “E”. The C-D keys are used to choose time or day while the E key is used to confirm.

Summary of Contents for MARLENE P/I

















































































Search results

Summary of Contents for MARLENE P/I

Reviews:

Related manuals for MARLENE P/I

Brands by name

Popular brands

Sergio Leoni MARLENE P/I, Installation Manual

Search results

Summary of Contents for MARLENE P/I

Reviews:

Related manuals for MARLENE P/I

Brands by name

Popular brands