USING THE CONTROLS
SERFAS E-BIKE OWNER’S MANUAL
START UP:
To turn on your bike, push the power switch on the battery
(Fig.1), then press and hold the button for 3 seconds (Fig.2).
To turn off, press and hold the button for 3 seconds (Fig.2), then
press and hold the power button on the battery for 2 seconds. The
display and battery have an energy-saving feature, if there is no activity
for 10 minutes, they will turn off automatically to preserve battery life.
Push the or arrows to change the level of pedal assist (Fig.2).
Hold and for 3 seconds to switch between showing real-time
speed, average speed, and max speed (Fig.2).
Push to toggle between the display of the Odometer, Trip Distance,
Voltage, and Elapsed Time.
BACKLIGHT:
Press and hold for 3 seconds to enable the backlight
on the display. Press and hold again for 4 seconds to turn it off
(Fig.2).
WALK MODE:
To enable walk mode, first come to a complete stop and
stand next to the bike. Press and hold 3 seconds. The bike will
slowly move forward at 3.5 MPH / 6 KPH as long as you hold the
button. This feature is useful for pushing the bike up a hill or walkng
through a crowd, where you cannot safely ride.
“
Super walk mode
” is an even faster version of walk mode. To use it,
hold down the arrow to engage standard walk mode, then press the
throttle. This is useful on very steep climbs or when towing a trailer. Use
caution with both walk modes.