F – Interface and Communication
OMM.F.S.ZZ.00
F-
1
June
2018
Interface and Communication
Touch Display Operator Panel
The Touch Display Operator Panel (OP), shown on Pic. F.1, is used as a main interface between the dehumidifier
and operator. The same OP can be located in the dehumidifier main electric panel (default; used as a local OP) or
installed remotely from the dehumidifier
NOTE:
length of CAT5 or CAT6 cable, between remote OP and the dehumidifier MUST NOT exceed 1000’!
Touch Display OP allows to:
Access Touch Display
Menus
View dehumidifier current operational
statuses (Touch Display Communication,
Alarms, dehumidifier operational calls, etc.)
View controlled parameters’ values (premise
air temperature, humidity and, if applicable,
pool water temperature) and current date
and time.
Touch Display Menus:
Home
Opens/returns to the home page
Logs
Access to dehumidifier logs and log-related features
(Alarms,
etc.)
User
Access to user settings (
Setpoints
) and commands (
Stop/Restart
Dehumidifier, etc.)
Advanced
Access to advanced settings and features
Help
Context sensitive help presenting information related to the viewed page
Most common/basic maintenance tasks performed using Touch Display OP
Adjust Setpoint –
in
User
menu: press the
User
button, then press the
Setpoints
button; select desired
parameter (room air temperature etc.) and enter the desired value. Press the
Enter
button to confirm the
entered value.
Stop/Restart Dehumidifier ––
in
User
menu: press the
User
button, then press the
System Restart
button;
o
To stop and restart dehumidifier, press the
System Restart
button
o
To reboot Touch Display OP, press the
Restart Display
button
Review Alarm records ––
done via the
Logs
menu: press the
Logs
button, then press the
Alarm Log
button.
Unlock device/dehumidifier, stopped and currently locked out on the alarm ––
done via
Logs
menu: press
the
Logs
button, then press the
Current Alarms
button; press the
Clear
button next to the respective alarm
(the alarm that’s locked out the device or entire dehumidifier).
For detailed information on TouchDisplay OP refer to
Command Center Touch Display User Manual
, provided with
the dehumidifier (or contact factory to obtain a copy).
Pic. F.1
Summary of Contents for CLASSIC NE Series
