www.SereneLifeHome.com
8
CONTROL PANEL
1. Timer:
24h timer setup, press this key to set
ON/OFF
time of the dehumidifier,
the setting range is 1-24h, every press adjusts one hour. If you want to cancel
timer setup, press twice continuously after confirmation of setting time.
2. Inside Drying Key:
Press this key to start drying procedure in the dehumidifier,
this can prevent mold inside the dehumidifier due to damp. The whole drying
procedure needs approximate 1h. Press this key again to cancel the drying
function in the dehumidifier, and to recover to running state before starting
drying.
3. Fan Speed:
Under
AUTO
or
CONTINUOUS
mode, adjust the fan speed,
HIGH
and
LOW
can be circularly selected.
4. LCD Display:
In
AUTO, CONTINUOUS AND DRYING
modes, etc., this indicator
displays room humidity. When it is set in
AUTO
mode, this indicator shows the
set humidity; and displays the set time in timer state, % represents percentage
of humidity.
5. Humidity Setting:
Once this key is pressed, the humidity is displayed circularly
in the range of 30%-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%, and the
humidity setting is only valid in
AUTO
mode.
6. Mode:
During startup or timer startup press this key to select
AUTO, CONTINUOUS
and
DRYING
modes, etc., and the indicator lamp corresponding to the selected
mode is on. Press and hold (3 seconds) the Mode button to activate the child
lock. Repeat the process to turn the child lock off.
7. On/off key:
Press this key to turn on or turn off the dehumidifier.
1
2
3
4
5
6
7