www.SereneLifeHome.com
13
TROUBLESHOOTING
If the following problems occur to the dehumidifier, the following solutions
can be adopted.
Symptoms
The unit does not
turn ON
Possible reasons
Solutions
Power cord is unplugged
Plug the power cord properly
into the power socket.
The water tank is full.
Water tank is not placed properly.
Drain water from the water
tank, and then install the
water tank again.
The ambient temperature is lower
than 5°C or higher than 32°C
Normal phenomenon
The dehumidifi-
cation function is
not effective
Is the room temperature or
humidity too low?
In dry season the dehumidifi-
cation ability will reduce.
Are the air outlet & inlet blocked?
Clean up the objects blocking
the air outlet and inlet.
Air is not blown out
Is the air filter net blocked?
Clean the air filter net according
to the above method.
Noise is abnormal
during operation
Is the dehumidifier placed improperly
so that it is inclined or unstable?
Place the dehumidifier in a
smooth place.
Is the air filter net blocked?
Clean the air filter net according
to the above method.
There is “tittering” sound
The flowing sound of
refrigerant, which is a normal
phenomenon.
Water leaks
Connection of drainage pipe
becomes loose
Fasten drainage pipe.
Drainage system is blocked
Remove obstacles and
straighten out water pipe.
Frosting occurs
The ambient temperature is low,
and it is in the state waiting for
defrost.
It is a normal phenomenon,
and the dehumidifier has the
automatic defrosting function.
Display Code Error
FL
The water tank is full
E1
The coil sensor detects anomaly
E2
The room temperature sensor detects anomaly
P1
The unit is in the defrosting state, normal
CL
The unit is in internal drying state, normal
LC
Child lock funtcion starts