3
Safety Cutout:
Serene Convection heating panels are fitted with an auto-reset thermal cutout. This
safety device will automatically switch off the elements should the heater reach an
abnormal temperature.
Should this occur: switch off the heater immediately and allow the heater to cool-
down. Overheating is normally caused by blockage of the air vents or by the vents
being covered.
NEVER COVER THE HEATING PANNEL OR ANY OF THE VENTS. To clean the vents, use a
vacuum cleaner as necessary.
Installation
Connection Details:
The heater is supplied with a power cord fitted with a 3-pin plug and is IP24 compliant.
Electrical Installation:
This appliance must be installed in accordance with the current electrical wiring rules
and regulations.
The heater must not be located immediately below a socket-outlet.
When used in a bathroom, the heater must be installed such that the controls cannot
be touched by a person in the bath or shower.
The minimum required distance from the heater to any floor is 150mm. The minimum
required distance from the heater to any adjacent wall is 200mm.
