6
Operation Guide
Setup:
Power on/off
Ensure the power switch (20) is set to off before plugging in. Once plugged-in turn on
the power switch (20). There will be a short “beep” to indicate the unit is connected
to the power & the power indicator light will display.
Then Press (1) to switch the unit on.
Manual or Auto mode Selection:
Touch (2) to select the required mode.
If manual mode is selected
M
will display. If Auto mode is selected
A
will display.
Note:
•
If the unit is turned off the prior settings will be retained and used when
powered back on.
•
The temperature is factory preset to 35c.
•
The programed memory is held in the event of any power interruption.
Manual Mode Operation:
Once manual mode is selected use (5) & (6) to set the desired room temperature, this
temperature will display in (19) while being set. The heater will warm the room until
this temperature is reached and then ensure this is efficiently maintained.
Note: Once the temp has been set (19) will return to displaying the real time room
temp.
