Filter
This heater is fitted with an air filter to
protect the heating elements from dust
and dirt. The filter is removable and can
be fitted from either the left or right hand
side of the heater.
To keep the heater operating efficiently,
remove and clean the filter once every six
months. Ensure the filter is always
fitted before operating the heater.
Safety Cutout
Air Filter
This heater is fitted with a thermal safety cutout device. In the case of over-heating,
the safety cutout automatically switches off the heating elements and fan motor. As
a result, the heater stops working but the LED indicator stays on.
Note: If the heater switches off, the LED indicator may also turn off when the
room temperature reaches the thermostat setting.
If the safety cutout is activated:
1. Turn the heater off at the wall switch and leave to cool for
approximately 30 minutes.
2. Check the air filter and clean if necessary. Ensure the filter is fitted
again before operating the heater.
3. Eliminate any other possible reason for overheating (such as
obstacles in front of the air inlet and outlet grille).
4. Turn the heater on and check operation. If the heater still fails to
operate, contact your nearest authorised service agent.
Care
The heater is best wiped down from time to time with a damp cloth. Do not
use any abrasive cleaners.
