Thermostat
The heat output is regulated by a built-in thermostat. The thermostat maintains the
required ambient temperature by automatically turning the heater on and off.
Starting from the ‘Freeze Guard’ position, turn the thermostat knob
clockwise until you hear a ‘click’. The heater will then start heating and the LED
indicator will light up. The more the thermostat knob is turned clockwise, the higher
the ambient temperature will be.
If the ambient temperature is close to 30°C or more, the heater may not turn on even
if the thermostat is set on maximum. Alternatively, if the ambient temperature is below
5°C, the heater may operate continuously even if the thermostat is set on
minimum.
To set the thermostat:
1. Turn the thermostat knob clockwise
to maximum and wait until a
comfortable ambient temperature is
reached.
2.Turn the thermostat knob anti-
clockwise until you hear a ‘click’ and
the heater turns off.
3. Fine adjustments can then be made.
Freeze Guard
When the thermostat knob is turned fully anti-clockwise, pointing to the
‘Freeze Guard’ symbol, the heater will operate if the room
temperature falls below 5°C.
Note: This heater does not have an on/off switch. To turn the heater off it
must be turned off at the wall switch.
LED Indicator
Freeze Guard
Thermostat Knob
