4
Physical Details - Network Camera
Front - Network Camera
Figure 2: Front Panel
Privacy Button
On
(Green)
- The privacy button is activated.
Off
- The privacy button is not in use.
Lens
No physical adjustment is required or possible for the lens, but you
should ensure that the lens cover remain clean. The image quality is
degraded if the lens cover is dirty or smudged.
Microphone
The built-in microphone is mounted on the front.
Reset Button
This button is recessed; you need a pin or paper clip can be used to
depress it. It can be activated at any time the camera is in the
"ready" mode.
•
Reset to manufacturer default valued and reboot
. When
pressed and held over 10 seconds, the settings of Network
Camera will be set to their default values.
Note
:
After this procedure is completed, the
Power
LED will blink three
times to confirm that the reset was completed successfully.
Power LED
(Green)
On
- Power on.
Off
- No power.
Blinking
- The
Power
LED will blink during start up. This will take
15 to 20 seconds.
Active LED
(Green)
Off
- No user is viewing the camera.
Blinking
- User(s) is viewing the camera.
