Wireless Access Point User Guide
64
•
Your network administrator can advise you of the correct settings for each network.
802.1x networks typically use EAP-TLS. This is a dynamic key system, so there is no
need to enter key values.
Enabling Encryption
To enable encryption for a wireless network, follow this procedure:
1. Click on the
Wireless Networks
tab.
Figure 52: Wireless Networks Screen
2. Select the wireless network from the
Available Networks
list, and click
Configure
.
3. Select and enter the correct values, as advised by your Network Administrator.
For example, to use EAP-TLS, you would enable
Data encryption
, and click the checkbox
for the setting
The key is provided for me automatically
, as shown below.
Summary of Contents for AP51DA
Page 1: ...Dual Band 802 11a b g Wireless Access Point User s Guide...
Page 2: ......
Page 41: ...Setup 37...
