Setup
11
7. From the menu, check the following screens, and configure as necessary for your envi-
ronment. Details of these screens and settings are described in the following sections of
this chapter.
•
System
•
Access Control
•
2.4GHz Wireless
•
Basic
•
Security
•
Advanced
•
5GHz Wireless
•
Basic
•
Security
•
Advanced
•
Management
•
Admin Login (Set login name and password)
•
Config File
•
SNMP
•
Upgrade Firmware
8. Setup of the Wireless Access Point is now complete.
Wireless stations must now be set to match the Wireless Access Point. See Chapter 4 for
details.
If you can't connect:
It is likely that your PC’s IP address is incompatible with the Wireless Access
Point’s IP address. This can happen if your LAN does not have a DHCP Server.
The default IP address of the Wireless Access Point is 192.168.0.228, with a
Network Mask of 255.255.255.0.
If your PC’s IP address is not compatible with this, you must change your PC’s IP
address to an unused value in the range 192.168.0.1 ~ 192.168.0.254, with a
Network Mask of 255.255.255.0. See
Appendix C - Windows TCP/IP
for details
for this procedure.
Summary of Contents for AP51DA
Page 1: ...Dual Band 802 11a b g Wireless Access Point User s Guide...
Page 2: ......
Page 41: ...Setup 37...