DA
L
19
65
Pag. 4/6
195
!
4- Take the motor out of the metal botton box.
ATTENTION
The motor is fixed on the foundation box by means
of two normal nuts, due to problems of transport.
To install the motor in the system, these two nuts
have to be removed and trown away, replaced with
four self-locking nuts as standard.
!
M
C
/5
C
I
E
5- Arrange the founding box at ground level and check the horizontal level.
6- Pre-arrang the piping for the electrical connections.
7- Pre-arrange piping for the draining of the rainfall.
8- Cement definitively with concrete.
The connection between the power supply cable of the motor and the cable of the control panel
has to be carried out outside the foundation box and inside a weather proof housing. On the
contrary a water infiltration may be occur through the power supply cable causing the motor
failure.
!
> 65mm
GATE HING
WATER DRAIN PIPE WITH
SUITABLE SLOPE
VERY IMPORTANT
WELL WITH ABUNDANT DRAINAGE FOR
THE WATER DRAIN
WATER-PROOF CONTAINER WHERE TO
CARRY OUT ELECTRIC CONNECTIONS
DRAIN PIPE
GUIDE SHOE
STIRRUP WITH UNCLAMPING
