22
www.sera-web.com
OPERATION
Change diaphragm
The diaphragm must be replaced if the Service message occurs.
The menu specifies the following procedure for the pump:
Replacement of the diaphragm
System
see
“Replacement
of the diaphragm”
Operating Manual
of the pump
Rinse
Pump rinsed?
Disconnect voltage
The counters for diaphragm operating hours and diaphragm service life are reset after successful diaphragm replacement.
Factory settings
Reset pump to factory settings (see parameters table for factory settings).
Service
Factory setting
Messages
All messages that occur during operation are displayed here.
The displayed messages are in chronological order.
Tap on the text "delete list" to delete the list of messages from the memory.
However, this is only possible if the signal is no longer present. For example, if the fault has not been rectified, it is not possible
to delete the error and it is written to the memory again.
Messages
Messages
Error message
Delete messages
Pump switches off.
Rectify fault.
Messages
Warning message
Delete messages
Eliminate cause.
