Home
/
Geo
/
Sicce Syncra 1.5
/
Installation Manual

Geo Sicce Syncra 1.5, Installation Manual

The Geo Sicce Syncra 1.5 is a high-performance water pump designed for aquariums and water systems. Ensure seamless installation and operation by referring to the comprehensive Installation Manual, available for free download at manualshive.com. This manual provides step-by-step instructions for users, allowing them to maximize the product's potential effortlessly.

Share

1
2
3
4
5
6

Page: 1 / 6

background image

Sicce Syncra Pump Installation

Items needed to install a Sicce Syncra pump to your GEO calcium reactor

1.

Sicce pump (supplied with reactor)

2.

Pump install kit (supplied with reactor)

3.

Scissors or tube cutters

4.

Flat head screw driver

5.

8 mm nut driver/socket

6.

Thread sealing tape or paste

7.

Pliers or strong finger

1
2
3
...
»

Summary of Contents for Sicce Syncra 1.5







Reviews:

No comments

Related manuals for Sicce Syncra 1.5

AquaAir Eco 250

Brand: Oase Pages: 11

Brand: Oase Pages: 36

Smart ATO micro SATO-120P

Brand: AutoAqua Pages: 12

Marin Protein skimmer 600 S

Brand: Sera Pages: 3

Brand: Red Sea Pages: 16

Brand: Red Sea Pages: 16

Brand: Red Sea Pages: 20

Brand: Red Sea Pages: 56

Brand: Red Sea Pages: 64

Brand: Red Sea Pages: 68

MAX NANO Complete Plug & Play Open Top Reef System

Brand: Red Sea Pages: 120

NILUS POWER DIM

Brand: Orphek Pages: 6

Atlantik V2 Wireless

Brand: Orphek Pages: 40

Brand: LVY TECH Pages: 8

Brand: Aqueon Pages: 2

Brand: Aqueon Pages: 3

Under Rim LED Accent Light

Brand: Aqueon Pages: 4

7.5G LED Shrimp

Brand: Aqueon Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands