www.sera-web.com
27
SOFTWARE UPDATE
■
Disconnect the pump from the power supply.
■
Connect the USB-M12 adapter (
1
) (90051890) to the USB stick FAT32 (
2)
and connect it to the pump.
1
2
■
Press the START/STOP and UP buttons while switching the power supply of the pump back on.
■
The pump is now in the update mode. Confirm the instructions with the ENTER button.
■
The update is completed.
■
The pump restarts automatically.
■
Disconnect USB-M12 adapter from the pump.
■
The pump is operational.
NOTE
The parameter settings made on the pump are retained after the software update.
