46
STEP 4
Set the air choke lever to the centre position.
Strongly pull the starter handle repeatedly
until the engine starts. Let the engine run for
5-10 seconds to warm up. Set the air choke
lever to the lower position, then press the
throttle lever to unlock it.
STEP 5
Gently push the throttle lever, increase engine
speed to maximum rpms and perform the job.
Perform the cutting operation firmly holding
the brushcutter by gripping ergonomically
designed handles with both hands.
STEP 6
If the engine is warm, turn on the brushcutter
and follow the same procedures as during the
cold start, but omitting pushing the primer.
The air choke shall be in the lower position.
TURNING ON THE PETROL BRUSHCUTTER
