42
STEP 4
Mount the safety guard onto the lower boom
part. Slide the protective flange onto the
splined gearbox shaft so that cutoffs in the
gearbox body and in the flange match each
other. Additionally attach the metal mounting
plate to the gearbox.
STEP 5
Place the cutter blade on the protective
flange. Put hold-down washer on top of
the cutter blade, then tighten the nut until
it stops. Insert the Allen key into opening
between the protective flange and the
gearbox. Tighten the nut with a wrench.
STEP 6
Insert a safety pin into the hole in the gearbox
shaft. If one side of the cutter blade has
become dull, turn over the cutter blade and
continue working.
WHEN USING A CUTTER BLADE
WARNING!
It is forbidden to sharpen the cutter
blade! Dull cutter blade shall be replaced with a
new one!
ASSEMBLING THE PETROL BRUSHCUTTER
