Sequential Prophet X, User Manual

Page: 46 / 88

76 77 Transpose Sequential Prophet X User’s Guide Glide
Transpose
The
up
and
down
buttons in the
transpose
section transpose the keyboard
up or down in octaves. The LED indicates the current keyboard trans-
position state. Transposing the keyboard also changes the MIDI note
numbers of the keys so that MIDI notes sent are also transposed. Trans-
pose settings are global and are not saved with individual programs.
The Transpose controls
Hold
When
hold
is on, any notes played will continue to play until
hold
is
turned off. When used in conjunction with the arpeggiator, notes are
latched on. If
hold
is on and at least one key continuously held down,
any new notes played are added to the arpeggio.
The Hold button
Glide
Glide causes the pitch of a note to glide up or down from the pitch of the
previously played note. Glide is turned on and off using the
glide
switch,
but the
rate
must also be set. If the
glide
button is on, but
rate
is set to
0, glide has no effect.
Glide can be set individually for each oscillator and, if
sample stretch
(see “Using Sample Stretch” on page 101) is enabled, instruments 1
and/or 2. If
sample stretch
is not enabled for a sampled instrument,
Glide can’t be used with that instrument.
Instr 1 Instr 2
Press to enable Glide
The Glide controls
To use Glide:
1. Press the
glide
button.
2. Play a series of notes up and down the keyboard while you turn the
glide amount
knob to adjust the amount of glide.
To set the Glide Amount separately for each oscillator:
1. Press the
glide
button.
2. In the display menu, press Soft Key 4 (
glide rate
).
3. Play a series of notes up and down the keyboard while you turn Soft
Knobs 1-4 (
glide rate
) to adjust the amount of glide for individual
oscillators and/or instruments.
Osc1 Rate Inst 1 Rate Osc2 Rate Inst 2 Rate
GLIDE RATE
Keyboard Glide Rate Unison Glide
0
GLIDE RATE
0
GLIDE RATE
0
GLIDE RATE
0