SEPTENTRIO PolaRx5S, User Manual

Page: 37 / 107

4.7. PRESERVE ON EVENT LOGG I NG (POEL)
4.7 Preserve On Event Logging (POEL)
4.7.1 Introduction
I n some cases, especially when a lot of data is being logged on the receiver, it may be
interesting to preserve certain valuable fi les which are linked to a speci fi c event (e.g. the
occurrence of an earthquake). Preserve On Event Logging (POEL) allows such Event-based
marking of
fi les in order to prevent them from being deleted.
To con fi gure POEL, create a new log session as described in Section 4.5 and select Type:
âĂ Ÿ Preserve on EventâĂ Ź . Currently, âĂ Ÿ EventsâĂ Ź refers to hardware events: a voltage
transition registered by either the Event A or the Event B pins. Data can be preserved from x
minutes before until y minutes after event as shown in Figure 4-28. The maximum amount
of time data can be preserved before the event is 24 hours.
Figure 4-28: Conifguring a new Preserve On Event log session. I n this example,
data is preserved from 15 minutes before until 15 minutes after the event.
37