•
Connect the micro-USB cable between the
front-panel connector of the AsteRx SB and
a PC or USB adapter
•
If the AsteRx SB was turned on before
the last power outage, it will start up
automatically
•
If the AsteRx SB does not
start up automatically,
press firmly on the
button
1. Powering up
2. Connecting an antenna
•
Connect one end of the antenna cable to the antenna and
the other end to the rear-panel
ANT
connector
•
Make sure the antenna has a clear view of the sky
3. Is the WiFi turned on?
•
Connect the WiFi antenna to the
front-panel connector
•
The WiFi modem is turned on by
default
•
When WiFi is on, the front-panel
LED will be lit
4a. Connecting to the AsteRx SB
over WiFi
4b. Connecting to the AsteRx SB
over USB
•
Find the AsteRx SB WiFi signal
on your device and click:
Connect
•
With the mictro USB cable
connected between the
AsteRx SB and your PC,
wait for the USB drivers
to fully install
•
When connected, open a web
browser using the IP address:
192.168.20.1
•
When the drivers have
installed, open a web
browser with the IP address:
192.168.3.1
OR
