36
36
Development Kit
36
5.13
USB Dev
That connector can be attached to a PC to power the DevKit and to communicate with the
receiver over its USB port.
5.14
USB Host
Reserved.
5.15
REF IN
Reserved.
5.16
Buttons
Pressing the nRST button drives the nRST pin of the AsteRx-i OEM low, which resets the
receiver.
Pressing the LOGGING button drives the Button pin of the AsteRx-i OEM low. This can be
used to enabled and disable logging, as described in section 2.9.
The buttons are also connected to J601 and J602 2-pin headers (see above picture). Tying
the nRST or LOGGING pins of these headers to ground is the same as pressing the
respective button.
5.17
SD Card Socket
The receiver can log files on the micro SD Card in this socket. See section 2.9 for a
description of the SD Card logging.
nRST
LOGGING
GND
