To verify the normal operation of the router, check the following LEDs after connecting the router,
modem, and PC with a LAN cable, as follows:
LED
Normal Operation
Actions to take if not illuminated
PWR
ON when connecting adapter
Check for adapter power failure
LAN
ON when cable is connected normally
Check cable connection and PC power supply
WiMAX RSSI
Represents WiMAX received signal
strength indication (RSSI), ON when in
router mode
Check that router mode is selected
Configuration
If one or more LED lights is not in “normal operation”, take the actions specified in the table.
Install a router after connecting to the network.
If normal connection between router and PC is checked, you have to set up the PC and router.
PC setup is to control network configuration for Windows 98, Windows 2000, or Windows XP to
use the Internet while the PC is connected to a router.
Router setup is to connect a router to the Internet.
Please refer to the "CPE setup on the web page" chapter.
05
Network Configuration
Local Network
External Network
Gateway
PC
WiMAX
Internet
