background image

Introduction to the Product 

The SWC-3x00 receives external WiMAX signals to form an in-building infrastructure on a 

WiMAX network, and is covered by an Ethernet network internally. The product serves as a relay 

as well as an internet router. 

However, the purpose of the product is mostly to supply signals to users, with the emphasis 

being its relay rather than its modem functions.

It is also a wired and wireless internet router that enables several systems to share a single 

internet address supplied by a high-speed internet service provider. 

Function

Features

IEEE802.16e WiMAX Support

Wave2 = DL : 20Mbps / UL : 6Mbps

IEEE802.3u Ethernet Support

10/100Mbps wired LAN connectable

LAN Port

1 Port 10/100Mbps Ethernet Switch built-in

Cable Auto Sense

Straight (Direct) or Cross Cable auto sensing

NAT function

Supports up to 253 wired and wireless connections and internet router

Firewall function

Manages basic firewall and IP/Port/based access

03

LED Indicator

Function

PWR

Power Supply status (On at Power ON) 

LAN

ON when connected to PC, Flashing during communication

RSSI1~RSSI5

Represents WiMAX received signal strength indication (RSSI), on when router mode 

is selected.

WiMAX

ON when connected to PC, Flashing during communication

Functional Features

LED Information

Summary of Contents for SWC-3x00






























Reviews: