SEON TL-HD, Install And User Manual

Page: 63 / 94

DVR Configuration Menus
700-1014 R002 4–9
4.4. Recording Menu
Use the Recording Settings menu to set the resolution, recording speed in frames per
second (FPS), image quality, Record Delay-On and Record Delay-Off times, and
other recording options.
Figure 4-8 Recording Settings Menu
Table 7 Record Configuration Items
Menu Item Description Value [Default]
Repeat Record Enables recording over older video data once the hard drive is full.
• When On, the DVR continues recording, overwriting the first recorded data. the HD
used overlay shows “N/A Repeating”. The DVR continues recording overwriting the
first recorded data.
• When Off, at 100%, the on screen display HD Used message shows “100%. The
DVR stops recording.
[On], Off
Record Delay-
On Time
Enables a time delay after the ignition signal turns on until the DVR is turned on. 0, [30 sec], 1, 5, 10,
20, 30, 45, 60 min
Record Delay-
Off Time
Enables a time delay to continue recording after the ignition signal to the DVR is turned
off. The power output connector on the DVR back panel remains active during this time.
0, [15], 30 sec, 1, 5,
10, 20, 30, 45, 60
min
Power Delay-
Off Time
Enables a time delay after the record delay-off time expires to keep the DVR on but not
recording. The control connector on the DVR back panel remains active to allow
peripherals such as Smart-Reach to be powered up during the power delay time.
0, [15], 30 sec, 1, 5,
10, 20, 30, 45, 60
min, 2, 4 hours
Alarm
Partition Size
Enables a portion of the hard drive to be reserved for alarm data that needs to be
protected and not erased by the Repeat Record function.
[Off], 10, 20, 30,
40%
Overwrite
Alarm
Partition
When an Alarm Partition size is selected, enable or disable recording over older
protected alarms once the alarm partition is full.
[Off], On
Analog
Record2
The DVR can record video in two streams, one at high resolution for full detailed event
information, and the other (Analog Record2) at lower resolution for fast downloading or
real-time viewing over a low bandwidth network, such as a cellular link.
In the event of an emergency, if the system is configured with Smart-Reach Cellular
hardware and cellular plan, AnalogRecord2 allows quick access to video on-line to
assess the situation.
Use the Analog Record 2 settings menus to set lower frame per second recording rates
for the analog cameras selected in the Camera menu.
Off, 1, 2, 3, 4, [5]
fps