SEON TL-HD, Install And User Manual

Page: 28 / 94

DVR Setup
2–8 700-1014 R002
13. In the Recording Settings menu, click Record2. Select the desired recording speed
for the secondary video stream. Turn off the Camera Speed settings for any
unused cameras. Click Back to save the settings.
14. In the Recording Settings menu, click Timers only if you have a specific
requirement for timers.
15. In the Recording Settings menu, click HD Camera.
CAUTION: Set Unused Cameras Off
When a DVR is installed with less than the full complement of cameras
connected, disable unused camera input settings to prevent the DVR from
generating Video Loss (VLoss) events for those camera inputs. In the DVR
Configuration menus, disable unused camera inputs as follows:
• Record Settings menu: Camera Speed OFF,
Camera Audio OFF (to save disk space)
• Alarms/Signals menu: Channel Speed OFF.
Leave the
Enable Timers
setting set
to Off, unless instructed otherwise
and provided specific start and end
timer information.
The timer function can only operate
when the ignition is on. It cannot be
set to record when the vehicle is off.
Click
Back
to save the menu
settings.
Figure 2-12 Timer Settings Menu
Leave the HD Camera settings at
defaults unless you have special
requirements.
Do not adjust the Advanced Settings
unless specifically instructed to do
so.
Click
Back
to save the menu
settings.
Figure 2-13 Timer Settings Menu