6
Programmable Electronic Lock
Three code options:
FACTORY CODE:
The safe will ALWAYS unlock using this 5-digit code (found on the back of the owner’s manual).
This code cannot be deleted.
USER CODE:
A 5-digit programmable code of your choosing that can be changed or deleted.
SECONDARY CODE:
A 5-digit programmable code of your choosing that can be changed or deleted. Can only
be programmed after a user code has been activated.
NOTE:
The “C” key is a clear key. This can be used at any time to clear the system and return
to standby mode – unless you are in delay mode (3 consecutive invalid entries).
NOTE:
Only one user code can be programmed at a time.
To ADD a user code:
1
Press the “P” key.
2
Enter the 5-digit factory code.
3
The light will lash green and then you will have ive
seconds to enter your own 5-digit personal user code.
To DELETE a user code:
1
Press the “P” key.
2
Enter the 5-digit factory code.
3
Enter 0,0,0,0,0.
NOTE:
The electronic lock will NOT indicate that it has deleted the user code – please test
the code to make sure it has been deleted.
Programming information
Programming the user code