Installation Manual of HD-TVI Speed Dome
10
Table 2-9
Set Communication Mode of the Dome
DIP Switch SW2-Simplex/Half-duplex Settings
Description
7
Simplex
OFF
Half-duplex
ON
Terminal Resistor Settings
The No. 8 of SW2 switch is used for turning on/off the 120Ω terminal resistor.
Table 2-10
Set Terminal Resistor
Switch No.
Description
8
Turn on the resistor
OFF
Turn off the resistor
ON
The o-ring in the groove of the switch cover is for waterproof.
2.2.4
Mini Speed Dome Settings
DIP Switch Location of Mini IR Speed Dome
Steps:
1.
Remove the switch cover as shown in Figure 2-11(left).
2.
Set the address and baudrate with DIP switch.
3.
Install the switch cover back to the speed dome.
DIP Switch
Switch Cover
Figure 2-11
DIP Switch of Mini IR Speed Dome
DIP Switch Location of Mini Analog Speed Dome
