Installation Manual of HD-TVI Speed Dome
21
If the dome is installed to the cement wall, drill three Φ5 mounting holes onto the wall
according to the hole locations, and then insert the cement screws into the holes and
finally use self-tapping screws to secure the mounting base to the wall.
Screw Holes
Cable Hole
Figure 3-11
Secure the Mounting Base
8.
Install the speed dome to the mounting base.
(1)
Route the cables for the speed dome. Align the bottom of the speed dome with the
mounting base.
(2)
Line up the direction of arrow with the spring end of the mounting base.
(3)
Push the speed dome upwards and then forwards in the direction of arrow. When the speed
dome is placed in position, the spring will automatically snap into the lock clip firmly. Refer
to the following figure.
Line up
①
②
Push Forwards
Push Upwards
Spring
Lock Clip
Figure 3-12
Attach the Back Box to the Mounting Base
