10
3.2.4 Notifications
Only when the main screen is displayed, some additional notifications regarding certain settings are
can being displayed on top of the status bar.
Alarm (SI600 only):
An alarm can be set when pH and / or temperature values go beyond user definable upper and lower
limits. See chapters 6.1.1 and 6.1.2 for setting or changing the pH and temperature alarm settings.
Notification
of a set Alarm
Notification of
an activated Alarm
Calibration reminder:
A calibration reminder can be set to perform calibrations within a specific time interval. The time
interval is user definable. See chapter 5.5 for setting or changing the calibration reminder function.
Notification of a set
calibration reminder
Notification of an
activated calibration
reminder
Stability check:
The stability check can be set to provide a warning when the rate of change of pH exceeds a certain
threshold. See chapter 6.1.3 for setting or changing the stability check.
Notification of a set
stability check
Notification of an
activated stability check
Bias:
A user definable bias value can be set to adjust the displayed pH measurement value. See chapter 6.3
for setting or changing the bias.
Notification of a set
bias
Range:
A range notification is a default alarm (not user definable) and provides a warning when pH and / or
temperature conditions exceed the specification limits of the equipment.
Notification of a
range alarm
