40
5
SELECT PROGRAM
OPTION 1-8
Programming the User Passcodes
Your system may be programmed with up to 50 user passcodes. Consult
your Security Company Representative as to which passcodes have been
enabled and what Authority Level has been assigned to each one.
To program User Passcodes:
1.
Press
. The Control Station will display:
2.
Enter passcode:
.
The Control Station will display:
3.
Press
. The Control Station will display:
4.
Enter the User ID
(1 - 50) that you wish to
program/change.
5.
Press
.
6.
Enter new four-digit passcode
Repeat above steps for each passcode to be programmed or press
to return to the Ready mode.
If the new passcode being entered is a duplicate of an existing one, the
Control Station will sound an error tone and return to the first digit
location so you may try again.
If you wish to make a User passcode inoperable, enter ”0000“ as the new
four digit passcode.
TO PROGRAM
ENTER PASSCODE
USER 00
SELECT USER ID
ZX440F PROGRAMMING
9
ENTER
CLEAR
Summary of Contents for ZX440F
Page 55: ...55 NOTES Notes...
Page 59: ...59...
