Sentrol ZX440F, Manual, Page: 16 / 60

16
Removing Bypass
1. Press . The Control Station will display:
2. Enter passcode:
The Control Station will display:
3. Press to unbypass all bypassed zones, then press .
The Control Station will briefly display:
then returns to the zone selection display:
4. Press to save changes or to cancel changes.
After saving any changes, the Control Station will return to the
READY prompt after briefly displaying:
ZONE __
ZONE 00 - ALL
ZONES UNBYPASSED
BYPASSING
COMPLETE
TO BYPASS ZONES
ENTER PASSCODE
ZONE __
OPTIONAL FEATURES
4
0
ENTER
ENTER CLEAR