WORLD OF WELLNESS
EN
Instructions for use for the user
p. 19/22
8.3. Description of the functions and control elements
Observe
Fig. 1:Operating and display elements on page 17.
●
On/Off button
1
Use this button to switch the control unit on and off (standby). If the operating
time and temperature have already been set, the control units starts immediately
with the previously selected settings. The settings are saved when switching to
standby.
●
Light button
2
Here you can switch on the cabin light at any time. even if the control unit is
in standby. The cabin light also stays on once the operating time has elapsed.
●
+ button
3
Press this button to increase the value of the selected option. Hold down the
button to increase the value more quickly. As soon as you press the button, the
display begins to flash and the target value is shown.
●
Mode/OK button
4
You can switch between the displays for temperature and the operating time
with this button. The current value is displayed. You can also press this button
to confirm the target value.
●
- button
5
Press this button to decrease the value of the selected option. Hold down the
button to increase the value more quickly. As soon as you press the button, the
display begins to flash and the target value is shown.
●
Temperature and duration display
6
When the display is lit up permanently it shows the respective current value. The
target value is displayed when you press button
3
or
5
. The display flashes until
you press button
4
or the value is set automatically after 5 seconds. Then the
display is lit up permanently and the actual value is shown again.
