![Sentiotec K3-NEXT Manual Download Page 24](http://html1.mh-extra.com/html/sentiotec/k3-next/k3-next_manual_1244706024.webp)
8
Sauna
operation
at selected time
8.1 Turning on the control
Turn on the control according to chapter 5.1.
8.2 Setting the desired time
You can set the time, after which the stove is to start
heating. You can set the time at a minimum of 15 mi-
nutes (display 00.15), or at a maximum of 23 hrs. and
45 minutes (display 23.45).
NOTE - Optional sauna door safety-moni-
tor:
After setting the desired time, the sauna door will be
monitored (refer to chapter 3) to safeguard against
fire hazards.
1. Press and hold time key
9
.
• The desired time is reset to zero and from thereon
will count at 15 minute increments.
2. Release the time key
9
.
• The display
3
indicates the desired time.
• The time set starts and the remaining time until the
stove will start is indicated.
3. Set the desired temperature using the knob
4
.
Note (with a pencil mark) the temperature most
agreeable to you.
After the desired time set has elapsed the stove will be
started. If the cabin temperature measured is less than
the desired temperature set, the stove will respond.
The stove will heat.
If the cabin temperature measured is greater than the
desired temperature set, the stove will not respond.
8.3 Cancelling the selected time
1. Briefly press the time key
9
.
• The desired start-time will be cancelled.
8.4 Turning off the control
Turn off the control according to chapter 5.2.
9 Steam operation
at selected time
9.1 Turning on the control
Turn on the control according to chapter 5.1.
9.2 Setting the selected time
You can set the time, after which the stove and the
steam generator will turn on. You can set the time at
a minimum of 15 minutes (display 00.15), or at a ma-
ximum of 23 hrs. and 45 minutes (display 23.45).
NOTE - Optional sauna door safety-moni-
tor:
To safeguard against fire hazards, the sauna door will
be monitored after the desired start-time has been set
(time until the stove turns on) (refer to chapter 3).
1. Press and hold time key
9
.
• The desired time is reset to zero and from thereon
will count at 15 minute increments.
2. Release the time key
9
.
• The display
3
indicates the desired time.
• The time set starts and the remaining time until the
stove will start is indicated.
Steam operation at temperatures below 65°C
only:
Refer to chapter 1 Operating Modes.
3. Using the knob
4
set the desired temperature at
a range
5
of 40°- 65°C, and with the knob
6
set
the desired steam output.
Note (with a pencil mark) the settings most agreeable
to you.
After the selected time has elapsed, the stove and
steam generator start running. The steam output is
implemented by quickly turning on and off the steam
generator. The time for turning the generator on and
off depends on the steam output selected.
9.3 Cancelling the desired time
1. Briefly press the time key
9
.
• The desired start-time will be cancelled.
9.4 Turning off the control
Turn off the control according to chapter 5.2.
WE DO IT FIRST.
Instructions for use for the user
P. 10/14
Figure
5
Summary of Contents for K3-NEXT
Page 56: ...4 3 2 1 5 6 7 8 9 Figura 4 Figura 5 Istruzioni per uso e montaggio P 14 14 WE DO IT FIRST...
Page 84: ...4 3 2 1 5 6 7 8 9 Bild 4 Bild 5 Monterings och bruksanvisning S 14 14 WE DO IT FIRST...
Page 98: ...4 3 2 1 5 6 7 8 9 Obr zek 4 Obr zek 5 WE DO IT FIRST N vod k mont i a pou it s 14 14...
Page 99: ...WE DO IT FIRST NOTIZEN APPUNTI NOTES NOTE NOTITIES...