Sentiotec HC4-B-RS485, Instructions For Installation And Use Manual, Page: 46 / 364

Instructions for use for the user p. 46/60
Accessing user program:
3. Use rotary selector
1
to select the user programs icon. Then press
briefly to open the submenu.
► The “User programs” submenu opens and the display shows the
last user program underlined.
4. Press the rotary knob again to use another user program.
► The value is now highlighted in green and can be changed.
► There are five user programs available [1–5]
► Press the rotary selector again to confirm the setting.
5. Move the cursor (underscore ) to the right to “Start” and briefly press
the rotary selector.
► The user program is started.
Creating your own user programs:
You can create user programs as you would like. A preset user program
is overwritten in the process. Perform the following steps:
1. Start all functions that are to be switched on with the user program.
2. Use rotary selector
1
to select the user programs icon. Then press
briefly to open the submenu.
3. Move the cursor (underscore ) to the left to “Save” and briefly press
the rotary selector.
► The settings are stored in the selected user program.
► To switch off user programs, use the All Off function.