Sentiotec CK 41, Instructions For Installation And Use Manual

Page: 61 / 92

EN
Installation instructions, for professionals only p. 17/44
5.6. Connecting heater sensor F1
1. Guide the wires for the heater sensor through the cable bushing 9 into the
low-voltage connection area
5
.
2. Connect the red wires for the heater sensor to the terminals labelled “ r-r ”
in terminal strip
4
.
3. Connect the white wires for the heater sensor to the terminals labelled “ w-w ”
in terminal strip
4
.
5.7. Installing bench sensor F2 (optional)
1. Guide the wires for the bench sensor through the cable bushing
7
into the
low-voltage connection area
5
.
2. Connect the wires for the bench sensor to the terminals labelled “ sw-br ” in
terminal strip
4
.
5.8. Installing humidity temperature sensor FTS2 (optional)
1. Guide the wires for the sensor through the cable bushing
7
into the low-
voltage connection area
5
.
2. Connect the wires for the temperature sensor lines to the terminals labelled
“ sw-br ” in terminal strip
4
.
a. Connect the black wire to terminal “ sw ”.
b. Connect the brown wire to terminal “ br ”.
3. Connect the wires for the humidity sensor to the terminals labelled “
or-rt-gn
”
in terminal strip
4
.
c. Connect the orange wire to terminal “ or ”.
d. Connect the red wire to terminal “ rt ”.
e. Connect the green wire to terminal “ gn ”.