EN
Instructions for use for the user
p. 63/70
Perform the following steps to save the settings in the table above in user
program 2:
1. Select the temperature symbol
5
by pressing the mode button
D
.
Then briefly press the On/Off button
A
.
►
The sauna heater switches on.
2. Set the temperature to 45 °C with the plus button
B
and the minus button
C
.
►
The display
1
shows the desired temperature for a few seconds.
3. Select the humidity symbol
6
by pressing the mode button
D
. Then briefly
press the On/Off button
A
.
►
The evaporator switches on.
4. Set the humidity to 55% with the plus button
B
and the minus button
C
.
►
The display
1
shows the desired humidity for a few seconds.
5. Select the light symbol
8
by pressing the mode button
D
. Then briefly
press the On/Off button
A
.
►
The light switches on.
►
The display
1
shows the intensity.
6. Set the light intensity to 50% with the plus button
B
and the minus button
C
.
►
The display
1
shows the set intensity.
7. Select the user program symbol
4
by pressing the mode button
D
.
►
The user program symbol lights up.
8. Select number 2 with the plus button
B
and the minus button
C
. Press the
plus button
B
and the minus button
C
for about 3 seconds.
► The saving of the user program is confirmed with a short flashing of the
user program symbol
4
.
►
The settings are stored in user program 2.