Installation instructions, for professionals only
p. 28/70
5.2. Connecting the control panel
1. Feed the connection cable for the control panel through the cable gland
4
into the low-voltage connection area
1
.
2. Connect the plug of the RJ-10 cable to the connection socket
h
.
Fig. 9 Connection example of the Pro D3i
The sauna control units of the Pro D series enable operation of up to
2 Pro D control panels and an additional output control panel on one
power supply unit. Always use the “Y adapter” supplied with the control
panel for connecting the optional control panel (
“3.2. Optional acces-
sories” on page 10
).