Sentera Controls MTY-7-15-AT, Mounting And Operating Instructions

Page: 4 / 8

www.sentera.eu
MIW-MTY-7-15-AT-EN-000 - 19 / 09 / 2019 4 - 8
back to the table of contents
PRODUCT DESCRIPTION
The MTY-7-15-AT controllers provide manual speed control of single-phase voltage
controllable motors (120 VAC / 60 Hz) through phase angle control. They feature a
potentiometer for output voltage adjustment and an internal trimmer for infrequent
minimum speed setting. The controllers are suitable for both inset and surface
mounting. Several motors can be connected as long as the current limit is not
exceeded.
ARTICLE CODES
Article code Power supply Output
MTY-7-15-AT
120 VAC ±10 % / 60 Hz 120 VAC / max. 1,5 A
INTENDED AREA OF USE
■
Manual control of the motor / fan speed in HVAC applications
■
For indoor use only
TECHNICAL DATA
■
Power supply: 120 VAC ±10 % / 60 Hz
■
Output: 120 VAC / max. 1,5 A
■
Rated current range: 0,1—1,5 A
■
Minimum speed adjustment by trimmer: 40—120 VAC
■
Enclosure:
► External: ASA, white-ivory (RAL9010), IP54 (according to EN 60529)
► Internal: polyamide, white-ivory (RAL9010), IP44 (according to EN 60529)
■
Operating ambient conditions:
►
temperature: 0—35 °C
► rel. humidity: < 95 % rH (non-condensing)
■
Storage temperature: -10—40 °C
STANDARDS
■
Low Voltage Directive 2006/95/EC
■
EMC Directive 2004/108/EC: EN 61326
■
WEEE Directive 2012/19/EU
■
RoHs Directive 2011/65/EU
MTY-7-15-AT
ELECTRONIC FAN SPEED
CONTROLLER