1608 4th Street Suite 200 Berkeley CA 94710
|
|
P 510.548.4620 F 510.548.8264
Quick Start Guide: FlexRadio Cabinet
Install the plastic washer (a) onto
the threaded ferrule. Ensure the
flange on the washer is seated on
the ¾ inch hole. The flat side of
the washer contacts the nut.
Add Washer
Drill a hole ¾ inches ( 1.9 cm) diameter for aluminum ferrule antenna on top of the flat
surface of the traffic cabinet with a hole saw or a step drill bit where the omni directional
antenna will be installed.
Note: Ensure the antenna hole location will not interfere with the traffic cabinet inside.
Drill a Hole in Traffic Cabinet
3
Install Omni Directional Antenna
Pass the connectors through the hole. Pull the cable
until the threaded end of the antenna ferrule appears
in the hole.
DO NOT
pull on connectors. Pulling on
the connectors may cause them to detach or may cause
internal damage to the cable connection.
Thread Connectors into Cabinet
a
Please refer to
Bolt-On Antenna Installation Guide -
Slotted Washer & Nut
that is provided in the antenna
packaging for more details.
Omni Directional Antenna Installation
DRAFT
