Body Fat Scale
Instructions for Use
iF1949B
Advise for use & care
1. Do not use the scale in humid, overheat environment.
(Temperature range from 5
℃
to 35
℃
. )
2. Stand on the scale steadily and touch the electrodes on
the platform with your bare feet. Tip over will lead to a fall
when you step on the edge of one side of the scale.
3. Do not drop, shock or strike the scale as it is a precise
instrument.
4. Keep the scale clean. Do not use acid cleaning agent.
5. Do not use the scale on the place with intense shake.
Keep standing firmly on scale when in use.
6. To ensure the accuracy of the data, it is recommended
that each measurement be carried out at the same time
of day.
7. Fat measurement is not available for children under 10
years of age and adults over 100 years of age.
8. When the battery runs out, please remove the battery
in time to prevent leakage of the battery lead scale body
corrosion;
9. The use of a fat measurement function is not permitted
for pacemakers or other implanted medical devices.
1 6 i F - 0 0 7 E R 0
About the body fat scale
The product is a smart body fat scale with a high-pre-
cision strain gauge sensor, which can help you to store
and keep track of your weight on smart phone. This
scale can transmit your weight data to your smart
phone via Bluetooth technology, as well as make
graph of your weight results, from which you are able
to keep track of the trend anytime. Download the App
on your phone to use Bluetooth scale, you will start
your first step of weight control.
ISO 9001 CERTIFIED BY SGS
Manufacturer: Zhongshan Camry Electronic Co., Ltd.
Address: Baishawan Industrial Park, Qiwan Road(N),
East District, Zhongshan City, Guangdong Province
Postal Code: 528403
Tel: 0760-88235618
Fax: 0760-88235600
Email: [email protected]
The product picture is indicative only.
Appearance specifications please in kind prevail.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
WARNING: Any changes or modifications not expressly
approved by the party responsible for compliance could void the
user's authority to operate this equipment.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction
