Page 7
5.
Charging the Battery
The battery can be charged in the following 2 ways.
5.1.
Connect the smaller end of the USB cable to the Sensory PBR. Connect the wider end of the
USB cable to the charging adaptor and then plug it into a power socket to start charging the
battery. The unit should say charging when this process has been started. To check the
charging status, press the Information key 3 times. The unit may be used as usual when it is
being charged with a charger.
5.2.
Connect the unit to the PC via the USB cable and charging of the battery starts
automatically. The charging speed is slower than when charging using the power socket
charger. The unit cannot be used when it is being charged through the PC, but it is
recognised as a removal disk for file management.
6.
Selecting Internal Memory or the MicroSD Card
Press the Esc key several times until you are prompted to choose from either the internal memory or
MicroSD card. Use the Up or Down Arrow key to navigate to your preference and press the OK key to
view its contents.
Note: When putting in the MicroSD card, the front side of the unit should be facing up, the angled
corner of the card should face downward going into the slot and then slide it in until it engages.
7.
File Management
After navigating to a file or folder, press the Information key and a few things will be announced
including the name of the file, size of the file, the total number of files in the current folder and the
file number on which you are focussed.
7.1.
File Editing Functions
When focussed on a file or folder, pressing the Menu key twice will present the following functions:
Delete: Delete the file or folder
Cut: Cut the file or folder
Copy: Copy the file or folder
Paste: Paste the previously cut or copied items (file or folder)
Send to MicroSD card: Send or transfer the file or folder to the MicroSD card
