Sensory Science SV294 User Manual Download

Page: 13 / 66

Identification of Controls

Remote Control

Turns the DVD RVCR on and off.

- Opens and closes the disc tray in DVD mode.
- Ejects the tape in the VCR deck in VCR mode.

Switches the view on your TV to the DVD RVCR tuner.

Selects DVD mode.

Selects VCR mode.

Switches the DVD RVCR input to Tuner, LINE1, LINE2

Switches between the DVD RVCR tuner and your TV tuner.

Displays or exits the Setup menu.

Displays information about the currently loaded disc, VHS tape, or TV
channel.

Edits chapters or splits titles of DVD+R(+RW) discs.

Confirms menu selections.

œ √…†

: Selects menu options.

- CH(+/–) : Selects channels.

Accesses DVD disc menus.

- Selects numbered options in menus.
- Selects TV channels.
- Manually adjusts tracking.

Starts recording. Press repeatedly to set the recording time. For more
details, Refer to One Touch Record (OTR) on page 46.

- Starts playback.
- Pauses playback or recording temporarily. Press again to exit Pause mode.

Stops playback or recording.

- DVD: Searches backward/forward.
- VCR: Rewinds/advances during Stop mode. Press during Play mode for

fast reverse/forward picture search.

Increases or decreases the slow motion speed when playing a DVD or VHS
tape.

Skips to the next or previous chapter/track.

DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지12

Summary of Contents for SV294



































































Search results

Summary of Contents for SV294

Reviews:

Related manuals for SV294

Brands by name

Popular brands

Sensory Science SV294, User Manual

Search results

Summary of Contents for SV294

Reviews:

Related manuals for SV294

Brands by name

Popular brands